How to install van refrigeration on a traditional three-wheeled fuel vehicle？
KingClima is the professional manufacturer of
Truck Refrigeration Units,
Box Truck Reefer Units,
Van Refrigeration Units and provide the transport refrigeration solutions according to different requirements.
As shown in the picture above, the customer’s vehicle model is a 12v traditional fuel car with a cabin of 2.2X1.5X1.2m about 4 cubic meters. Temperature requirement is 0 to +5°C, transporting dairy products.
First of all, the model of the car is small, we need to help the customer to confirm whether the car has a place to install the compressor.
The compressor needs to be installed next to the engine, and the compressor needs to be connected to the engine pulley to obtain power from the engine to drive the compressor.
After confirming the compressor, we recommend
V-200C Engine Drive Van Refrigeration, cooling capacity is about 1700W(0℃), R134a refrigerant, Roof mounted unit and slim evaporator design, it is suitable for customer’s requirements.
The power of the V-200C van refrigeration is 300-400w, and the customer will use it 4-6 hours a day, and there is only a 12V48Ah battery in the car, so he needs to install a 150A battery to ensure he can use it 4-6 hours a day. The customer is very satisfied with this solution
We are very professional in refrigeration units and can help customers make perfect refrigeration solutions according to their vehicles model. We not only have engine drive units, but also full electric units suitable for van and truck, whether it is low voltage or high voltage. We are also very good at diesel units and mobile trailer units. If you have a cooling problem on your vehicle model, please contact us.
